How Do You Recharge the JNR Alien 10000 Device?

Welcome to the vaping world, where you will get a diverse product collection with different capacities. Among these vaping devices, the JNR Alien 10000 impressed the vapers with its capabilities and brought them back for more. So, vapers must buy it to get satisfying hits and delicious puffs. In this article, we will discuss one of the most important aspects: its battery capacity and how you can recharge the JNR Alien 10000 device.

Knowing about the battery and charging process will help you manage your usage more effectively, maintain the device's condition, and avoid many problems as well. It also confirms the longevity of the device and consistent draws without any malfunction.

Discovering the Battery Power of the JNR Alien 10000?

The JNR Alien 10000 is a disposable vape that attracts vapers’ attention due to its excellent performance and exceptional capabilities. The device is powered by an 850mAh built-in rechargeable battery. Understanding the battery level is essential because it regulates how long the device can operate before needing a recharge. This high-capacity battery allows you to relish vapour inhalation for a prolonged period on a single charge.

Do you think this device’s battery does not work appropriately when you use it continuously throughout the day? Whether you are an occasional or frequent user, the device always performs well and handles each type of vaping. Although this vape has a high capacity, it is still small, which means you can easily carry it. Vape lovers who travel often can rely on it. You will obtain more than a few hours between recharges to satisfy your craving. It will never leave you when you need it most or in between sessions.

Additionally, this vape's rechargeable nature reduces the need to change the vape frequently or increase the usage limit, meaning you can use it many times, leading to cost-effectiveness over time. Lastly, this device’s battery has the special capability of completely supporting puff count and vape liquid and never running out of power until you intake all vape juice.

Why You Should Recharge the JNR Alien 10000 Correctly

Proper charging of the JNR Alien 10000 is necessary for vapers if they want to extend the device’s battery, avoid battery issues, and get the maximum results. As mentioned in the above heading, the JNR Alien 10000 comes with an 850mAh battery. If you can’t handle it properly, it may lose its performance and effectiveness after some usage. 

Proper handling and a daily charging routine maintain your device's condition, performance, and quality. A well-charged battery performs better and upholds power for a long time. This means you not only spend many hours vaping but also get the best possible experience every time you use it.  

Moreover, when you recharge the JNR Alien 10000 properly, you can save your device from overheating, overcharging, and sudden explosions, which can damage the battery and negatively impact the device’s functionality. It can also decrease the device's life, which means you can’t use it for countless days.  

Step-By-Step Commands to Recharge the JNR Alien 10000

In this section, we will guide you about the charging process that definitely help you to recharge the alien vape device. With the following of right steps, you can keep your device running smoothly and reliably.

Step1: Collect all Charging Equipment

First, you need to collect the necessary items, such as your vaping device, high-capacity charger and recommended charging port. Having all the equipment available will make your process easier and smoother. 

Moreover, if you use any other third-party charging wire, it will take hours to recharge the alien vape. This means more waiting and less vaping. The lower-quality wire also reduces the battery life and affects performance.

Step2: Find the Charging Port

Take your device and hold it firmly in your hand. Now, search for the charging port, which is mostly on the bottom or side of the device. It’s a hole that has the same shape as the charging wire.

Step3: Clean the Ports

Before inserting the port, you must make sure both the device's port and the wire’s charging port are free from dust. Inserting the wire without checking can sometimes cause disruption and improper connection. Moreover, you can clean the ports by using cotton buds.

Step4: Inserting the Cable into the Charging Port

After cleaning the ports, plug one end of the wire into the device port and make sure it is securely connected and never loose. However, confirm that you never connect it forcefully, as this can break the port and waste the device.

Step 5: Connect to a Power Source

Now, connect the other side of the Type-C charging port to a reliable power source, such as a USB port, adapter, or power bank. Once the wire is connected to the power source, make sure both sides are properly attached because a loose connection can also interrupt the charging process.

Step6: Monitor the Charging Process

The JNR Alien 10000 will show the status of charging in the form of light. The Type-C charging wire and appropriate power source recharge the JNR Alien 1000 within an hour. But it's a great step for you to monitor the charging process and check the device after a few minutes until your device’s battery does not charge. Checking the device continually will help you disconnect it from the wire and power source right after recharging. Plus, the colours may change according to the battery level. It usually shows red, blue, and green light.  

Step7: Disconnect the Device once fully charged

When the battery is charged, it may show a green light or turn off. This means it's time to remove the device because the battery is charged. In addition, you must check the battery status before unplugging to confirm that the battery level reaches at least 80-90%. Hence, be careful while removing everything.

Step 8: Start Puffing

After this process, you can confirm that your JNR Alien 10000 has been recharged proficiently and is ready for your next use. This means now you can use your device for several hours and indulge in your puffing without any hassle.

How to Maintain the Life of the JNR Alien 10000

Vapers should avoid these mistakes during the charging process. This confirms that their device is still in perfect condition and provides power for an extended time.

• Take a slow and steady puff. It will help you enjoy your favourite e-juice for a long time. Plus, if you are new to vaping, start with shorter draws and adjust the inhalation style as you become more comfortable.
• You must charge the battery at the right time and not unplug it before completing recharging. This ensures that the device provides power for several hours without losing its performance quality.
• Vapers should follow the right steps to recharge the JNR Alien 10000. Charging the device correctly is vital for getting the most out of its battery capacity and increasing its life.
• Overcharging is the most common mistake that most vapers can make. It shortens the battery's life. So, unplug it right after charging it to save its life.
• We recommend using the Type-C charging wire that comes with the device. Using the other wires can slow the process and cause a short circuit.
• Vapers must try to recharge the JNR Alien 10000 at room temperature for the best results.

Closing Remarks

The product of JNR, Alien vape 10000 puffs offers a smooth and satisfying vaping journey with an 850mAh battery and big puff counts. Monitor your usage. It will help you to change it at the right time. Also, the life of the device depends on your usage pattern. If you are a frequent lover, it might be possible the device will run out sooner than someone who vapes occasionally. Moreover, recharging the device is not difficult, but you must follow the right steps to confirm it remains functional until the last puff.